3. | Calculate the change in total vertical normal stress (o) and in effective stress (6') au a depth of 10 feet in a saturated clay layer if the water table is dropped from the ground surface to a depth of 20 feet below the ground surface. The clay has a water content of 35%, S = 100% and G, = 2.75. Assume that no change in degree of saturation or water content occurs when the water table is lowered. Take into account the capillary stresses generated.

3. | Calculate the change in total vertical normal stress (o) and in effective stress (6') au a depth of 10 feet in a saturated clay layer if the water table is dropped from the ground surface to a depth of 20 feet below the ground surface. The clay has a water content of 35%, S = 100% and G, = 2.75. Assume that no change in degree of saturation or water content occurs when the water table is lowered. Take into account the capillary stresses generated.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter9: In Situ Stresses

Section: Chapter Questions

Problem 9.12P

See similar textbooks

Similar questions

2. The depth of water in a well is 3 m. Below the |IAVA bottom of the well lies a layer of sand 5 meters thick overlying of the clay deposit. The specific clay a gravity respectively 2.64 and 2.70. Their water contents are respectively 25 and 20 percent. Compute the total stress, effective stress and the pore water pressures at pointS solids of sand and are 3m A and B of the figure shown. Sand 5 m A• Ans: 88 kN/m², 29.1 kN/m², 58.9 kN/m² $2 m 12 m Clay
The sub-surface profile at a certain site is shown in Figure. Given that YSM =112pcf, YML =109pcf, /ML,sat =113pcf, lateral earth pressure coefficient at rest K₁ =0.54. Compute U, Ox, Oz, Ox', andoz at Point A. Solution: Total vertical stress at A: O₂ = • Pore water pressure at A: u = • Effective vertical stress at A: 0₂ ● Effective horizontal stress at A: Ox' Total horizontal stress at A: Ox II psf; psf; psf; psf; psf; Silty Sand: (SM). Clayey Silt (ML) ▼ 12 ft 10 ft 11 ft
11. Consider the downward flow of water through a layer of sand in the tank shown. (see picture below) Void ratio of the soil = 0.52 Specific Gravity = 2.70 Compute the value of h1. (Answer: 0.436) Compute the effective stress at A. (Answer: 17.44 kPa) Compute the effective stress at B. (Answer: 31.98 kPa) Compute the seepage force per unit volume. (Answer: 3.57 kN/m3)
A ground profile consists of 2m silty sand underlain by 3m of clay. The ground water table is 3m below the ground surface. The sand has a unit weight of 14kN/cum. The clay has a unit weight of 16kN/cum above the water table and 20kN/cum below the water table. Determine the Total stress at the surface of the water table (kPa). Determine the effective stress at the bottom of the clay layer (kPa). Determine the effective stress 1m from the bottom of the clay layer (kPa). Please answer this asap. For upvote. Thank you very much
A uniform soil deposit has a dry unit weight of 15.6 kN/m³ and a saturated unit weight of 17.2 kN/m³. The groundwater table is at a distance of 4 m below the ground surface. Point A is at a depth of 6 m below the ground surface. If the water table rises by 3.5 m, determine the change in effective stress at A. Indicate if it is maintained, increased or decreased.
Calculate the change in total vertical normal stress(σ)and in effective stress(σ′)at a depth of10 m. in a saturated clay layer if the water table is dropped from the ground surface to a depth of20 m. below the ground surface. The clay has a water content of35%, S=100%andGs=2.75. Assume that no change in degree of saturation or water content occurs when the water table is lowered. Please type answer no write by hend.
Figure 2 shows the zone of capillary rise within a clay layer above the groundwater table. Using: H1 = 3 m., H2 = 2 m., H3 = 4 m. a.What is the value of the total stress 9m below the ground surface in kPa? b.What is the value of the effective stress 5m below the ground surface in kPa? c.What is the value of the effective stress 9m below the ground surface in kPa?
The saturated unit weight of a 10 m thick clay layer is 20 kN/m3. Calculate the vertical effective stress at a depth of 5 m if the groundwater level is at the surface and select the correct answer from the below: O A. Total stress = 50 kPa Porewater pressure = 48.5 kPa Effective stress = 52.1 kPa O B. Total stress = 120 kPa Porewater pressure = 40 kPa Effective stress = 60 kPa O C. Total stress = 100 kPa Porewater pressure = 49.1 kPa Effective stress = 50.1 Pa O D. Total stress 110 kPa Porewater pressure = 42.2 kPa Effective stress = 55 kPa
The water table in a deposit of uniform sand is located at 2 m. below the ground surface. Assuming the soil above the water table is dry. The void ratio is 0.75 and sp.gr. of solids is2.65. Determine the total stress at a depth of 5 m. below the ground surface. Determine the effective stress of the depth of 5 m. below the ground. Determine the effective stress of the depth of 5 m. below the ground surface if the soil above the water table is saturated by capillary action
A dilatometer test (DMT) was conducted in a clay deposit. The water table was located at a depth of 3 mbelow theground surface. At 8 m depth the contact pressure (p1) was 280 kPa and the expansion stress (p2) was 350 kPa.Assume σo = 95 kPa at the 8 m depth and μ = 0.35. Determine (a) Coefficient of at-rest earth pressure Ko,(b) Overconsolidation ratio OCR and (c) Modulus of elasticity Es.
Solve the following problems. Provide complete solutions and summary of answers. The water table in soil deposit is 2 meters below the ground surface. The soil above the water table has a dry unit weight of 14.85 kN/cu. Meter. The saturated unit weight of the soil is 20.58 kN/cu.meter. Determine the following: a. Total Stress at a point 4.80 meters below the ground b. Total Pore pressure 4.80 meters below the ground c. Total effective stress at a point 4.80 meters below the ground.
Answer the ff: continuation i) The total stress at the depth of 30 meters from the ground surface is: j) The neutral stress directly below the depth of 20 meters from the ground surface is k) The effective stress directly below the depth of 20 meters from the ground surface is: l) What is the unit weight of the fully saturated clay m) What is the unit weight of the dry clay layer? n) The total stress at a depth of 20 meters from the ground surface is: o) The effective stress at the depth of 30 meters from the ground surface is: