A computer system contains a big endian byte addressable memory system with 8 separate memory modules. Each memory module is 32 bits wide and contains 134217728 cells. Cells within each memory module are numbered 0 through 134217727. a) If the memory employs high order interleaving, what is the 32-bit memory address of cell 1048578 within module 3? b) If the high order interleaved memory uses little-endian instead of big-endian storage order, what is the 32-bit memory address of cell 511 within module 1? c) If the memory employs low order interleaving, what is the 32-bit memory address of byte 1048575 within module 2? Bytes are numbered starting from 0. Express the address in hex.

A computer system contains a big endian byte addressable memory system with 8 separate memory modules. Each memory module is 32 bits wide and contains 134217728 cells. Cells within each memory module are numbered 0 through 134217727. a) If the memory employs high order interleaving, what is the 32-bit memory address of cell 1048578 within module 3? b) If the high order interleaved memory uses little-endian instead of big-endian storage order, what is the 32-bit memory address of cell 511 within module 1? c) If the memory employs low order interleaving, what is the 32-bit memory address of byte 1048575 within module 2? Bytes are numbered starting from 0. Express the address in hex.

Name: A computer system contains a big endian byte addressable memory system
Uploaded: 2024-03-20T06:51:23.000Z
Channel: Bartleby
Description: A computer system contains a big endian byte addressable memory system with 8 separate memory modules. Each memory module is 32 bits wide and contains 134217728 cells. Cells within each memory module are numbered 0 through 134217727.a) If the memory

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter4: Processor Technology And Architecture

Section: Chapter Questions

Problem 2PE: If a microprocessor has a cycle time of 0.5 nanoseconds, what’s the processor clock rate? If the...

See similar textbooks

Similar questions

Most Intel CPUs use the __________, in which each memory address is represented by two integers.
A(n) __________ is a storage location implemented in the CPU.
A large endian byte addressed memory system with eight distinct memory modules is included in a computer system. Each memory module has 134217728 cells and is 32 bits wide. a) What is the 32-bit memory address of cell 1048578 in module 3 if the memory uses high order interleaving? b) What is the 32-bit memory address of byte 1048575 inside module 2 if the memory uses high order interleaving? c) What is the 32-bit memory address of cell 511 inside module 1 if the high order interleaved memory utilises little endian storage order instead of big endian storage order?
The memory unit of a computer has 256K words of 32 bits each. The computer has an instruction format with four fields: an opcode field; a mode field to specify one of seven addressing modes; a register address field to specify one of 60 registers; and a memory address field. Assume an instruction is 32 bits long. Answer the following:Q.) How large is the opcode field?
The memory unit of a computer has 256K words of 32 bits each. The computer has an instruction format with 4 fields: an opcode field; a mode field to specify 1 of 7 addressing modes; a register address field to specify one of 60 registers; and a memory address field. Assume an instruction is 32 bits long. Answer the following:a. How large must the mode field be?b. How large must the register field be?c. How large must the address field be?d. How large is the opcode field?
The memory unit of a computer has 2M words of 32 bits each. The computer has an instruction format with 4 fields: an opcode field; a mode field to specify 1 of 4 addressing modes; a register address field to specify one of 9 registers; and a memory address field. Assume an instruction is 32 bits long. Answer the following: c) How large must the address field be?
Problem 1. This problem is about operand modes, in particular about memory addressing using the operand modes described in lecture and the textbook. The following shows the contents of a portion of the program memory (locations Ox10000 through 0x10040), and certain registers. All contents are 64-bit quantities. Address Memory Contents 0x10040 0x10038 0x10030 0x10028 0x10020 0x10018 0x10010 0x10008 0x10000 a. movq (%rdi), %rax b. movq (%rdi,%rsi), %rax 100 0x10040 200 25 0x10028 0x10020 c. movq 8(%rdi, %rcx, 4) %r8 d. movq -8(%rdi,%rsi), rbx 500 0x10018 2 Register Contents %rdi 0x10008 %rsi %rdx %rcx For each of the following instructions, say what value ends up in the destination register. Each instruction starts with the state shown above, i.e., the effects do not accumulate. 0x20 8 4
A computer is having instruction length of 32 bits and operand field is 12-bits. The numbers of two-address instructions are 220 and remaining are the on e-address instructions. How many one-address instructions are 220 and remaining are the one-address instructions. How many one-address instructions are possible in this format?
On a typical microprocessor, a distinct I/O address is used to refer to the I/O data reg- isters and a distinct address for the control and status registers in an I/O controller for a given device. Such registers are referred to as ports. In the Intel 8088, two I/O in- struction formats are used. In one format, the 8-bit opcode specifies an I/O operation; this is followed by an 8-bit port address. Other I/O opcodes imply that the port ad- dress is in the 16-bit DX register. How many ports can the 8088 address in each I/O addressing mode? .
Computer Science A computer uses a memory of 64K words with 16 bits in each word.It has the following registers: PC, AR, TR, AC, DR and IRA memory-reference instruction consists of two words: an 16-bit operation-code(one word) and an address field (in the next word).a-List the sequence of microoperations for fetching a memory reference instructionand then placing the operand in DR. Start from timing signal To.b-Design the logic control gates arrangement to perform the fetch instructions.
Please using assembly language 8086 microprocessor Q5/Tow Matrixes 4X4 the first matrix has first-row storage from 220H to 223H, the second row starts from 430H to 433 H, the third row starts from 550H to 553H, and the fourth row starts from 661H to 664H at DS-OC30H. The second matrix has first-row storage from 336H to 339H, the second row starts from 546H to 549H, the third row starts from 666H to 669H, and the fourth row starts from 781H to 784H at DS-OB25H. Write a program to find their summation.
in 80886 microprocessor Write an ALP to evaluate x.(y +z) where x = 10H, y = 20H and z = 30H and store the result in a memory location 54000H.