a dilution is needed to prepare a standard of 10 mg Zn/L from 0.5g Zn/L. To carry out the dilution we have the following available bulb pipettes: 1ml,2ml,5ml,10ml,20ml and 25 ml and the following volumetric flask: 50ml,100ml, 250ml,500ml. which bulb pipette and which corresponding volumetric flask you would choose to carry out the dilution?

a dilution is needed to prepare a standard of 10 mg Zn/L from 0.5g Zn/L. To carry out the dilution we have the following available bulb pipettes: 1ml,2ml,5ml,10ml,20ml and 25 ml and the following volumetric flask: 50ml,100ml, 250ml,500ml. which bulb pipette and which corresponding volumetric flask you would choose to carry out the dilution?

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

A 22.41 mL of NaOH solution is required to reach the phenolphthalein endpoint in the standardization with 0.276 g of solid, monoprotic primary standard acid (MW 128.33) in a 25.00 mL solution. 12.34 mLof the same NaOH solution was added to titrate 5 mL of vinegar solution to the endpoint. Calculate the mass of acetic acid in this vinegar solution (d = 1.005 g/mL).
A NazCO3 standard solution is prepared by transferring 2.4817 grams of primary standard-grade sodium carbonate to a 250.0 mL volumetric flask, dissolving the sample in -100 ml of distilled deionized water, and diluted to the mark. A 25.00 mL aliquot is taken and titrated with 42.65 mL of HCI solution to the bromocresol green endpoint. Calculate the concentration of the HCI solution. (A 0.1598 M B 0.1098 M c) 0.3196 M (D) 0.05490 M
5. From the following data calculate the normalities of the acid and base solutions: weight of pure Na,CO3 = 0.2448 g; volume of acid = 43.65 mL ; volume of base used in back titration = 0.84 mL ; 1.000 mL of base = 0.982 mL of acid. Reaction: CO, + 2H* → H2CO3
A STOCK SOLUTION containing 0.1581 g/L K2CrO4 was prepared.In order to make the CALIBRATION STANDARD, 5 ml of the STOCK was transferredinto a 50ml volumetric flask and then diluted with an appropriate solvent.Calculate:(a) The ppm of K2CrO4 in the CALIBRATION STANDARD.(b) The molarity of K2CrO4 in the CALIBRATION STANDARD. (c) Calculate the molar absorptivity of K2CrO4 (at 371.0 nm). Assume that Beer's Law isobeyed over this concentration range.At 371.0 nm, this CALIBRATION STANDARD in a cell of path length 1.00 cm gave a %T of 59.752.
In the laboratory, a student was tasked to prepare a stock solution of HCl for titration. The available analytical grade HCl solution in the stock room was labelled 35% w/v HCl. The student proceeded to prepare the stock solution by mixing 10mL of the HCl solution with 490mL of analytical grade water. Then, the solution was further diluted by adding 5mL, since the total volume of the solution did not reach the 500mL etched mark on the volumetric flask. To prepare the titrant, the student mixed 10mL of the stock solution, then added 40mL of analytical grade water. The titrant was subsequently used to determine the concentration of two titrand. *Use the table as a reference 1. What is the normality of the available HCl reagent in the stock room?* 5.08 N 10.15 N 20.3 N 11.0 N None of the choices 2. What is the normality of the stock solution of HCl?* 0.09N 0.10N 0.11N 0.12N None of the choices 3. What is the normality of the titrant?*…
A Na2CO3 standard solution is prepared by transferring 2.4817 grams of primary standard-grade sodium carbonate to a 250.0- mL volumetric flask, dissolving the sample in ~100 mL of distilled deionized water, and diluted to the mark. A 25.00-mL aliquot is taken and titrated with 42.65 mL of HCl solution to the bromocresol green endpoint. Calculate the concentration of the HCI solution. a. 0.1098 M b. 0.3196 M c. 0.05490 M d. 0.1598 M
(b) Suppose the laboratory Technician carried out the same titration experiment in which he/she recorded an average volume of 20 cm³ of the dilute hydrochloric acid (HC) by titrating with 0.05 mol dm³ and 25 cm³ of potassium hydroxide (KOH). Calculate the concentration of hydrochloric acid from the Technician's experiment.
A mixture contains Na2CO3, NaOH and inert matter. A sample weighing 1.500 g requires 28.85 ml of 0.500N HCI to reach a phenolphthalein endpoint, and an additional 23.85 to reach a methyl orange endpoint.What are the percentages of Na2C03 and NaOH?
Six 50.0 ml volumetric flask 1 through 6 are labeled. 10.00 ml of 2.00 x 10-1 M Fe(NO3)3 solution was then pipet into each volumetric flask. A 1.00,2.00,3.00,4.00 and 5.00ml of 2.00 x 10-3M NaSCN solution was then pipetted to flask 2 through 6 respectively. A sufficient amount of 0.10 M nitric acid was then added to each flask to make each a total volume of 50.00ml. Hint M1V1=M2V2 a)what would be the concentration of Fe(NO3)3 in 0.10M HNO3? b)what would be the concentration of NaSCN in 0.10M HNO3?
How much amount of solids (in grams) do you need to prepare the following solutions? 1. 500.0 mL 0.1000 M stock EDTA solutiona. Weigh an appropriate amount of Na2H2EDTA2H2O (FW=372.24) to the nearest 0.1 mg 2. 100.0 mL 0.0500 M stock Ca2+ solutiona. Weigh appropriate amount of pure CaCO3 (FW=100.09) to the nearest 0.1 mg into a 250 mL beaker.
Six 50.0 ml volumetric flask 1-6 are labeled. 10.00 ml of 2.00 x 101 M Fe(NO3)3 solution was then pipet into each volumetric flask. A 1.00,2.00,3.00,4.00 and 5.00ml of 2.00 x 10-3M NaSCN solution was then pipetted to flask 2 through 6 respectively. A sufficient 0.10 M nitric acid was then added to each flask to make them total volume of 50.00ml. 1.a)Calculate the final Fe(NO3)3 concentrations for each. 1.b)Also how would you find the initial concentration of SCN- for each flask? Please show calculations to solutions.Thanks
A solution of Ca(OH)2 (FM = 74.09) was used in determining the equivalent weight of an unknown acid. To do so, the said solution was standardized against 0.1235 g KHP (FM = 204.22), requiring 7.45 mL to reach the phenolphthalein endpoint. On the other hand, a 0.0543 g unknown acid requires 12.85 mL standard Ca(OH)2 to reach the desired endpoint.a. Calculate the standard normality of Ca(OH)2.b. Calculate the equivalent weight of the unknown acid.c. From the information in the table, what is the most probable identity of the unknown acid?