A very large wind turbine with a rotor diameter of 200 m can generate a maximum of 14 MW output power. We plan to build a hydrogen energy storage system for the turbine with capacity to store the energy of one day of operation of the turbine at maximum power. The system uses an electrolyser to produce hydrogen from water, and is powered locally from the turbine output. The hydrogen is stored in a tank nearby the turbine at 700 bar pressure. Estimate the required size of the storage tank to be used, while taking into account the efficiency of the electrolysis process.

A very large wind turbine with a rotor diameter of 200 m can generate a maximum of 14 MW output power. We plan to build a hydrogen energy storage system for the turbine with capacity to store the energy of one day of operation of the turbine at maximum power. The system uses an electrolyser to produce hydrogen from water, and is powered locally from the turbine output. The hydrogen is stored in a tank nearby the turbine at 700 bar pressure. Estimate the required size of the storage tank to be used, while taking into account the efficiency of the electrolysis process.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam turbine with 1.5kg / s mass flow, 6MPa pressure, 500C temperature and 20 m / s speed is entering. The pressure at the outlet is 0.5MPa, the speed is 75 m / s and the degree of dryness is 0.95. Turbine power If its output is 2500kW, calculate the heat transfer from the turbine per unit time.
A pump operates between 100kPa and 10MPA. If the mass flow rate of the pump is 20.8 kg/s, and the isentropic efficiency is 92%, find the required pump power, in hp. Note that 1kW = 0.746hp. %3D
The power of a steam turbine in a thermal power plant is 60 MW. Water vapor enters the turbine at 3MPa pressure, 4000C temperature and 50 m / s speed, 10 kPa pressure, 0.9 dry degree and 200 m / s speed leaves the turbine. Considering the turbine as adiabatic; 1-Find the mass flow of steam 2-Find the turbine outlet cross-sectional area, its ratio (A2 / A1) to the inlet cross-sectional area.
We need a steam turbine is to generate 10 MW of power. The feed steam is 200 bar at 500 C. The exhaust is a saturated mixture at 1 bar at 110 C. Calculate the flow rate of steam required.
I am trying to find the mass flow rate that is extracted from the turbine I am getting nubers near 2.9 for a result. how do I solve this.
One kg of dry and saturated vapor enters to the turbine at 6.0 MPa. Steam leaves thisturbine stage at a pressure of 0.008 Mpa. Calculate the quality of steam at exit of turbine,heat rejected, heat added, cycle efficiency and engine efficiency.(Note: Draw the schematic and T-s diagram)
Deduce an expression for work done for stage of a reaction turbine and determine the condition for maximum efficiency.
Water at 50°C is cooled in a cooling tower which has an efficiency of 65%. The temperature of the surrounding air is 35°C dry bulb and 70% relative humidity. The heat dissipated from the condenser is 2,000,000kJ/hr. Find the capacity in liters per second of the pump used in the cooling tower.
2.A steam throttling valve with inlet conditions of 3MPA and 500C is connected to the inlet of the turbine. The turbine has 800kW power output and heat absorbed of 500kw. If the mass flow rate is 1kg/s and the exit temperature of steam is 400C, find the exit turbine pressure. (
A turbine receives steam at 10 MPa, 6000C and exhaust it at 0.2 MPa. (a) for the ideal Rankine engine, determine the work, steam rate, thermal efficiency, and means effective pressure. (b) for the actual engine,the brake engine efficiency is 84%; the driven generator efficiency is 93% and the rated output of the generator is 30 MW. Estimate the enthalpy ang quality (or temperature) of the exhaust..Compute the combined work, combined heat rate, and the total throttle flow for the rated power. Don't answer the given problem, just give me the schematic diagram andT-S diagram of the given problem
Steam is generated at 4.10 Mpa and 440°C and condensation occurs at 0.105 MPa a. For a Rankine engine operating between these limits, computethe thermal efficiency and the heat rate b. Considering that a Rankine cycle occurs between same limits, determine QA, QR, Wnet and eth c. What mass flow rate is required for a net output of 30 000 kW Don't answer the given problem, just give me the schematic diagram and t-s diagram of the given problem
Explain Hydroelectric power plant and Geothermal power plant?