An insulated container is partly filled with oil. The lid of the container is removed, 0.107 kg of water heated to 97.0°C is poured in, and the lid is replaced. As the water and the oil reach equilibrium, the volume of the oil increases by 1.40x10-5 m³. The density of the oil is 941 kg/m³, its specific heat capacity is 2250 J/(kg-C°), and its coefficient of volume expansion is 683x10-6 (Cº)-¹. What is the temperature when the oil and the water reach equilibrium? Number i Units °℃

An insulated container is partly filled with oil. The lid of the container is removed, 0.107 kg of water heated to 97.0°C is poured in, and the lid is replaced. As the water and the oil reach equilibrium, the volume of the oil increases by 1.40x10-5 m³. The density of the oil is 941 kg/m³, its specific heat capacity is 2250 J/(kg-C°), and its coefficient of volume expansion is 683x10-6 (Cº)-¹. What is the temperature when the oil and the water reach equilibrium? Number i Units °℃

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine the type of steam, given: Pressure: 770 kPa Specific volume: 260 x10-3 m3/kg O Saturated Liquid Saturated vapor O Wet Vapor O superheated Vapor
Oxygen (O2) inside a tank of volume 2.3 ft3 has a pressure of 2200 psig and is at 70°F. Part ofthe gas was used, the pressure and temperature dropped to; 1502 psig and 50°F. The tank isrigid. Determine the mass of oxygen used (lbm). MW of O2 is 32.
Refrigeration tubing is 2 inches in diameter and 10 ft. long and contains R 12 as a saturated vapor at o°F. What is the mass of R 12 in the tubing?
You have 500 g of water at 300C in a calorimeter with 20 cal / g heat capacity and a 400 g piece of aluminum is poured inside it at 900C. What is the equilibrium temperature of the system? Ignore losses to air. Specific heats: water: 1.00 cal / goC; aluminum: 0.21 cal / goC: the mass of the calorimeter is 20 cal/g
What is the resulting pressure when one pound of air at 15 psia and 20°F isheated at a constant volume to 800°F? show diagram
Q/ A dry gas reservoir is initially at an average pressure of 5500 psia and temperature of 145F. The gas has a gravity 0.67. What will the average reservoir pressure be when 40% of the original gas(in Scf) has been remained in the reservoir. Assume the volume occupied by the gas in the reservoir remains constant. If the reservoir originally contained 1MM cuft of reservoir gas, how much gas has been produced at a final reservoir pressure of 600 psia.
Properties of Pure Substancies What is the specific internal energy of water at 50 kPa and 20°C?
A rigid tank contains saturated liquid and vapur mixture of Refrigerant -134a at 26^o C.
A beaker of water sits in the sun until it reaches an equilibrium temperature of30°C.The beaker is made of 100 g of aluminum and contains 180 g of water. In an attempt to cool this system, a small block of ice at 0°C is added to the water. a. Determine the exact mass of ice needed to melt (giving up its latent heat of fusion) and bring the water and beaker temperature down to 0°C. b. If the ice block has a mass of 100 g, determine the final temperature of the system. If it turns out that Tf = 0°C, determine how much ice remains unmelted. c. Repeat your calculations for 50 g of ice.
A beaker of water sits in the sun until it reaches an equilibrium temperature of30°C. The beaker is made of 100 g of aluminum and contains 180 g of water. In an attempt to cool this system, a small block of ice at 0°C is added to the water. a. Determine the exact mass of ice needed to melt (giving up its latent heat of fusion) and bring the water and beaker temperature down to 0°C. b. If the ice block has a mass of 100 g, determine the final temperature of the system. If it turns out that Tf = 0°C, determine how much ice remains unmelted.
As shown in the figure below, you have a system including a Polyethylene vessel with mass Myessel = 0.229 kg. The vessel contains water with mass Mwater = 0.399 kg. Both the vessel and water are initially at a temperature of 54.6 degrees Celsius. You add steam into the system. The steam has an initial temperature of 167.4 degrees Celsius and a mass of Msteam = 10.9564 kg. The system will reach equilibrium with all the water having vaporized at some final temperature above 100 degrees Celsius. Steam water Pressure Vessel Find the system final temperature, Tfinal = Material c (J/(kg K)) Aluminum 897 1820 Beryllium Cadmium Iron Lead 129 Polyethylene 2303 Steel 466 Uranium 116 231 412 All of the water turns to steam. The system reaches equilibrium at T > 100° C Water c (J/(kg K)) ice 2090 4186 2010 water steam degrees Celsius Water L (J/kg) 334000 Fusion Vaporization 2230000
B- A 1.8 m rigid tank contains a refrigerant-134a at 50°C. One-third of the volume is in the liquid phase and the rest is in the vapor form. Determine (a) the pressure of the refrigerant-134a, (b) the quality of the saturated mixture, and (c) the density of the mixture. Use the table below: Temp. 'C Sat. Press. kPa 1253.6 v Sat. Liquid m'/kg V Sat. Vapour m /kg 0.015939 0.014265 48 0.0008996 52 1386.2 0.0009150