B- A centrifugal fan connected to air duct system, the static losses in the duct is 100 N/m2 and the mean air stream velocity is 12 m/s, air volume flow rate 2.5 m³/s and air density = 1.2 kg/m³. Estimate the fan power if the fan efficiency is 0. 85. With necessity validation. 496.52 watt 548.23 watt 661.80 watt

B- A centrifugal fan connected to air duct system, the static losses in the duct is 100 N/m2 and the mean air stream velocity is 12 m/s, air volume flow rate 2.5 m³/s and air density = 1.2 kg/m³. Estimate the fan power if the fan efficiency is 0. 85. With necessity validation. 496.52 watt 548.23 watt 661.80 watt

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

QUESTION 1:A centrifugal pump consists out of an impeller, diffuser and casing and is powered by 300kW (shaft power) and rotates at 96.3 rad/s. The flow rate generated by the machine is54.7 Kilo-litres/min. The impeller blade inlet angle and width is 23° and 180 mmrespectively. The blades occupy 12% of the impeller area and the water is assumed toenter the impeller radially. Suction and delivery pipes are equal in size.Determine:1.1The impeller inlet (i) diameter and inlet blade velocity.(Hint - Substitution: ln in terms of D and U, in terms of D, both sub into Tan of Blade inlet angle,only unknown is then solving for Dz)1.2.If the pump has a mechanical efficiency of 80%, calculate the blade velocity atoutlet (U.) and outlet whirl velocity Vw.. Assume the blade exit angle equal to theguide vane angle. (Hint - Substitution: Write Vw in terms of U, sub in Euler equation onlyunknown then is solve for Vwo)1 3Impeller outer diameter.1.4,If the flow through velocity is consistent through the…
7. A converging-diverging nozzle receives steam at a pressure of 380 psia with temperature of 480F and expands it to a pressure of 50 psia. Assuming the
Assuming the clearance is negligible for a single stage compressor with the following data.Atmospheric pressure: 90 kPaAtmospheric temperature: 17 ˚CDelivery pressure: 7 barFree air delivery flow rate: 0.2 m3/minTake “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the power input to the compressor in kW to 3 decimal places if the compression reversible isothermal?
Assuming the clearance is negligible for a single stage compressor with the following data.Atmospheric pressure: 90 kPaAtmospheric temperature: 17 ˚CDelivery pressure: 7 barFree air delivery flow rate: 0.2 m3/minTake “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.What is the power input to the compressor in kW to 2 decimal places if the compression is polytropic compression process with n=1.25?
2. A centrifugal pump consists out of an impeller, diffuser and casing and is powered by 300 kW (shaft power) and rotates at 96.3 rad/s. The flow rate generated by the machine is54.7 Kilo-litres/min. The impeller blade inlet angle and width is 23° and 180 mmrespectively. The blades occupy 12% of the impeller area and the water is assumed toenter the impeller radially. Suction and delivery pipes are equal in size. Determine:2.1. The impeller inlet (i) diameter and inlet blade velocity. (Hint - Substitution: Vfi in terms of Di and Ui in terms of Di both sub into Tan of Blade inlet angle, only unknown is then solving for Di2) 2.2 If the pump has a mechanical efficiency of 80%, calculate the blade velocity at outlet (Uo) and outlet whirl velocity Vwo. Assume the blade exit angle equal to the guide vane angle. (Hint - Substitution: Write Vwo in terms of Uo sub in Euler equation only unknown then is solve for Vwo 2.3 Impeller outer diameter. 2.4 If the flow through velocity is consistent…
What is the engine bore (in mm) required for good volumetric efficiency for an engine with two inlet and two exhaust valves, stroke of 90 mm, inlet air temperature of 332 K, exhaust temperature of 900 K, engine speed of 8200 rpm and exhaust valve diameter Assume specific heat ratio =1.3, R = 287 J/kg.K, and an average inlet flow coefficient 0.4 and an average exhaust flow coefficient 0.5. mm (each). Select one: O a. 96.57 O b. 70.23 O c. 105.2 O d. 91.05 O e. 82.71
The discharge through pump is 0.04 cu. m per sec and velocity of flow is constant and equal tp 2m/s. The internal and external diameter of an impeller of a centrifugal pump are 200 mm and 400 mm, respectively, which is running at 1000rpm. The diameters of the suction and delivery pipes are 140 mm and 90 mm respectively and suction and delivery heads are 6m (abs.) and 30m (abs.) of water respectively. If the outlet vane angle is 45 deg and power required to drive the pump is 16 kW, determine: (a) vane angle of the impeller at inlet, (b) the overall efficiency of the pump, and (c) manometric efficiency of the pump.
a. Given the static head of 28.91 m, and static pressure head of 3.15 cm WC. What is the normal pressure, Pn? b. What is the Static efficiency of the fan if the air flow rate is equal to 3.8 5m /sec, total head of 68.72 m, velocity head of 30.86 m, mechanical efficiency and power are 39.12% and 35.72 KW at 30.69°C, respectively. c. Solve for the area at entrance of the fan blade, if the it has a 346mm diameter, flow of air is equal to 23.328 m/se and flow rate of 3.05 m³ /second.
For an inlet valve, the mass flow rate through the valve is 0.44 kg/s. The flow coefficient is 0.62 and the cylinder pressure is 105 kPa. Assume intake system pressure and temperature are 180 kPa and 527 K, the specific heat ratio is 1.3 and R =287 J / kg.K. The area of the valve is (SI unit): Select one: a. 2.30*10-3 O b. 3.45*10-2 O c. 1.43*10-3 O d. 1.75*10-3 O e. 0.85*10-2
An acceptance test was conducted on a centrifugal pump having a suction pipe 25.4 cm in diameter and a discharge pipe 12.7 cm in diameter. Flow was 186 m³/hr of clear cold water. Pressure at suction was 114.3 mmHg vac and discharge pressure was 107 kPag at a point 91 cm above the point where the suction pressure was measured. Input to the pump was 15 hp. a. Determine the pump efficiency b. If the pump runs at 1750 rpm, what net flow, head, and brake hp would be developed and required if the pump speed were increased to 3500 rpm? Assume constant efficiency.
B) The air flow to a four cylinder four-stroke engine is 2.15 m³/min. During a test on the engine the following data were recorded: Bore 10.5cm; stroke 12.5cm; engine speed 1200 rpm, torque 150 N.m, fuel consumption 5.5 kg/hr, calorific value of fuel, 43124 kJ/kg, ambient temperature 1-The brake thermal efficiency. and pressure are 20°C and 1.03 barş. Calculate: 2-The brakes mean effective pressure. 3-The volumetric efficiency.
(Q1) A small reservoir based plant is planned in a remote location to supply water into a micro turbine to generate electricity. The height of water level in reservoir is 10 m. The micro turbine is to be located at ground level at a distance of 200 m from the reservoir. To generate sufficient power, the minimum head (total head) required at the turbine inlet is 9 m with the flow rate of 0.4 m3/s. The loss coefficient (KL) at the inlet to the pipe from reservoir is calculated as 0.4. Determine the minimum diameter of the cast iron pipe (roughness, e = 0.26 mm) required for the proposed design. Take following properties of the fluid: density (EGL). 1000 kg/m3, viscosity = 0.001 kg/m-s. Draw hydraulic grade line (HGL) and energy grade line Reservoir H = 10 m Inlet, K, = 0.4 Pipe Turbine 200 m