The diameter of the overhead lines in the form of cylindrical conductors in a 300 kV three-phase transmission system is 20 mm. a) - How much distance should there be between two conductors using the maximum area calculation equations? Calculate. (Puncture peak strength of air is 30kV / cm.) b) - In this configuration, if the distance between phase conductors is 0 m, will discharge calculation? c) - Maximum electric field in the same configuration, for electrode distances to be A m Calculate the value. (When heard in calculations Ꜫ0 = 8.854x10-12 F / m)

The diameter of the overhead lines in the form of cylindrical conductors in a 300 kV three-phase transmission system is 20 mm. a) - How much distance should there be between two conductors using the maximum area calculation equations? Calculate. (Puncture peak strength of air is 30kV / cm.) b) - In this configuration, if the distance between phase conductors is 0 m, will discharge calculation? c) - Maximum electric field in the same configuration, for electrode distances to be A m Calculate the value. (When heard in calculations Ꜫ0 = 8.854x10-12 F / m)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.5MCQ: Shield wires located above the phase conductors protect the phase conductors against lightning. True...

See similar textbooks

Similar questions

12. There are 6 conductors in a double circuit line. Each conductor has a radius of 12 mm. The 6conductors are arranged horizontally. The center to center distance between the conductor is 2m. The sequence of conductors are from left to right as follows: a,b.c,a', b', c'. Calculate the inductance per km per phase of system. the a' 2 m 2 m 2 m 2 m 2 m
The diameter of the overhead lines in the form of cylindrical conductors in a 380 kV three-phase transmission system is 28 mm.a) - How much distance should there be between two conductors using the maximum area calculation equations?Calculate. (Puncture peak strength of air is 30kV / cm.)b) - In this configuration, if the distance between phase conductors is 4m, at what voltage levelCalculate the discharge occurs?c) - Maximum electric field in the same configuration, for electrode distances to be 8mCalculate the value. If needed in calculations Ꜫ0 = 8.854x10-12 F / m)
Derive the equation of Capacitance per phase for the 3-phase double circuit line with hexagonal spacing. (transposition of conductors is not required)
A three phase, 11 KV, underground cable system, consider a single core of conductor radius 0.5 cm diameter and lead sheath of 1.25 cm. The core and lead sheath have been separated by two intersheaths with radius 0.75 cm and 1 cm. Draw the cable core, dielectric and intersheath layers showing the thickness of each layer, then determine the voltages on the both intersheaths. Suppose the maximum stress on the layers are the same.
a.Why does power plants have high amounts of voltages? Explain. b.Is it safe for transmission lines to have high current instead of high voltage? Why? c.What phenomenon is avoided by having separations between three conductor phases? Explain this phenomenon.
Discuss the various conductor materials used for overhead lines. What are their relative advantages and disadvantages?
A 30 kV single core cable has a conductor dimeter of 2 cm and a sheath of inside diameter 6 cm. Find the maximum (peak value) and minimum stress (peak value) in the insulation.
Q2. A 3-phase, 132 KV, 50 Hz, 100 Km, single circuit bundle conductor transmission line as shown in the figure below. If the diameter of each strand is1 cm, and the conductors are regularly transposed. Determine, the capacitance to neutral per phase per Km . 6 m 5 m 0.18 m
A 115 kv line has a horizontal configuration. The distance between adjacent conductors is 9ft. What is the geometric mean distance of the line?
1. A Single-phase, two-wire overhead line has solid cylindrical copper conductors with 2.4 cm diameter. The conductors are arranged in a horizontal configuration with 3 m spacing. Calculate the inductance of each conductor due to both internal and external flux linkages in mH/km. (
A three phase, 33 KV, underground cable system, consider a single core of conductor radius 0.8 cm diameter and lead sheath of 2.3 cm. The core and lead sheath have been separated by two intersheaths with radius 1.3 cm and 1.8 cm. Draw the cable core, dielectric and intersheath layers showing the thickness of each layer, then determine the voltages on the both intersheaths. Suppose the maximum stress on the layers are the same. Please i need it know please
4.8 A 60-Hz, single-phase two-wire overhead line has solid cylindrical copper conductors with a 1.5 cm diameter. The conductors are arranged in a horizontal configuration with 0.5 m spacing. Calculate in mH/km (a) the inductance of each conductor due to internal flux linkages only, (b) the inductance of each conductor due to both internal and external flux link- ages, and (c) the total inductance of the line.