urposes. One such application is currently practiced at Water Factory 21 in Orange ounty, California. Wastewater effluent (pH = 8) is treated by a number of processe nd the final product water is recharged into an aquifer with the main purpose of ontrolling groundwater degradation due to seawater intrusion. One of the treatment rocesses included in this plant is air stripping, a process in which volatile contamin e volatilized from water and transferred into air. Ammonia (pK,-9.3 at the design mnerature of 25°C) is one of the original target contaminants to be removed by
Q: 14. 5 kg of liquid seawater with initial temperature 0°C and salinity 3 percent (by mass) is mixed…
A: Specific heat capacity is a characteristic of a particular pure liquid. It is a minimum heat…
Q: 1. 3M KOH is added to the precipitate and the tube is heated again. The solution is then centrifuged…
A: Group II cations in systematic analysis are precipitated as sulphides. These sulfides are…
Q: A 10 g sample of Mg504 · 7H₂0 (246.489/mol) was heated in an oven at 105 °C until evaporated all the…
A:
Q: A…
A:
Q: A 25.00mL wastewater sample was analyzed for its Mg2+ content using a standard gravimetric method.…
A:
Q: A sample may contain any combination of sodium hydroxide, sodium carbonate and sodium bicarbonate…
A: Given: Amount of sample = 3.00 g Volume of HCl required to reach phenolphthalein endpoint =57.57 mL…
Q: Q1. Dissolved 0.273 grams of pure sodium oxalate (Na.C.O.) in distilled water and added sulfuric…
A: Normality of solution is equal to equivalents per litre. And Normality = n-factor × Molarity
Q: A water-carbonating plant is available for use in the home and operates by providing carbon dioxide…
A: The Henry’s constant of carbon dioxide at 298 K is 3.01 × 103 kPakg/mol. Value of 1 atm in kPa = 1 ×…
Q: Hexanoic acid was added to an immiscible biphasic solvent system, water and CCl4 at 20.0OC and the…
A: Given that : At 20.0OC, The equilibrium concentration (solubility) of hexanoic acid = 3.66 g/L in…
Q: Many rivers are affectwd by illegal small scale mining. Study have revealed extremlly high deposite…
A: The water pollution may be explained as the qualitative state of impurity by the cause of the use of…
Q: One litre of a saturated aqueous solution of Ag2SO4 (MW = 311.79 g mol- 1) at 25 °C is evaporated to…
A:
Q: The arsenic in a 1.203-g sample was converted to H,AsO4 by suitable treatment. The acid was then…
A: Given data: Weight of pesticide = 1. 203 g Pesticide →H3AsO4→AgNO3 Ag3AsO4 Ag++SCN- →AgSCN(s)…
Q: 1. For the pH 4.5 buffer, you must use acetic acid and sodium hydroxide: CH3COOH + NaOH → NaCH3COO +…
A: According to guidelines I am supposed to answer one question only
Q: The arsenic in a 1.010 g sample of a pesticide was converted to H3ASO4 by suitable treatment. The…
A:
Q: A 0.512 g sample of a commercial phosphate detergent was ignited at a red heat to destroy the…
A: You have the weight of the final residue, its molar mass and theamount of phosphorus in it. Assuming…
Q: For the purpose of determination of agricultural pesticides in river water, 3.2 liters of river…
A: Distribution coefficient = Kd = Concentration of solute in organic phase / Concentration of solute…
Q: An aqueous waste stream that has a maximum concentrationof 0.50 M H₂SO₄ (d=1.030 g/mL at 25C) will…
A:
Q: Describe the preparation of 138mL of 0.33 M HClO4 from a concentrated solution that has a specific…
A:
Q: What was the volume of 6.12 M acetic acid HC2H3O2 needed to prepare the 250 mL acetic acid/acetate…
A: Given that, Volume of buffer solution VB = 250 mL Concentration of acetic acid in buffer solution…
Q: Hexanoic acid was added to an immiscible biphasic solvent sysem, water and CCl4 at 20.0OC and the…
A:
Q: Show complete solutions for 2och poblem. A seientiet tasked to extract Fe from was an suspenion that…
A: a. reactions I Fe2O3 (aq) + 3SO3 (g) --> Fe2(SO4)3 (suspension) II Fe2(SO4)3 (suspension) +…
Q: Prove that for a 0.1M NA3PO4 solution the mass balance equation for the H2PO4 - is: [OH=] – [H*] -…
A: IMPORTANT POINTS: Firstly there is an incomplete information provided about the equation to be…
Q: (a) Water in vadose zone contains chlorobenzene of concentration 40 mg/L. What is the equilibrium…
A: “Since there are multiple questions and it is not mentioned that which one has to be solved so I am…
Q: A generic version for Drug X is applying registration to the FDA. For the generic drug to be…
A: The Van Slyke equation for the calculation of buffer capacity can be expressed as:…
Q: The arsenic in a 1.010 g sample of a pesticide was converted to H3AsO4 by suitable treatment. The…
A: molarity is defined as the moles of solute upon the volume of sample molarity =molesvolume
Q: A sulfuric acid spill occurred on the highway after a truck containing barrels of sulfuric acid…
A: 25.00 mL of ground water is titrated with 0.133 M NaOH solution.Buret Reading…
Q: A large bucket somehow gets contaminated with some gardening pesticide and was then filled with 2 L…
A: Given that, the concentration of the pesticide in water is 1.0% by weight and amount of water is 2 L…
Q: The weight of 7 ml of vinegar sample was 7.99 g, was required 31.0 ml of 0.3 M sodium hydroxide…
A: Now, the chemical reaction taking place is- CH3COOH + NaOH→CH3COONa + H2O Thus, 1 mole of acetic…
Q: If the Ksp for CaSO, is 2.4x10- calculate the SO2- in CasO. saturated solution.
A: Introduction: We have to calculate the concentration of sulfate ion.
Q: Does the NaOH raise or lower the solution pH? What is the amount of NaOH added in lbs/ton? What is…
A: Volume of solution = 200 gallons 1 gallon = 0.0315 ton So, Volume = 6.3 ton We have added NaOH to…
Q: Calculate the solubility at 25 °C of PbCrO4 in pure water and in a 0.0150M Na₂CrO4 solution. You'll…
A: Given: Concentration of Na2CrO4 solution = 0.0150 M Ksp of PbCrO4 = 2.8×10-13 Molar mass of PbCrO4 =…
Q: In gravimetric analysis, co-precipitation occurs alongside with analyte precipitation, resulting in…
A: Distinguish the difference between occlusion andinclusion and compare them using diagrams
Q: er, Solubility Product Constant of Sodium Chloride Introduction For slightly soluble salts, we have…
A: Given: Mass of empty evaporating dish = 28.00 g Volume of saturated NaCl solution = 10.00 mL Mass of…
Q: A certain barium halide exists as the hydrated salt BaX2.2H2O, where X is the halogen. The barium…
A: Given: Mass of BaX2·2H2O taken = 0.2650 g. And the mass of the precipitate forming on reaction with…
Q: A ceric sulfate solution that was standardized using 200 mg of arsenic trioxide (MW = 197.84g/n)…
A:
Q: Ametal sak vih he femal MCI, aystalies fom water to fom a soid with fhe compotion MCl, - GiH,0 The…
A: The reaction is – MCl2.6H2O s ⇔MCl2s +6H2Og
Q: Commercial perchloric acid (100.46 g/mol) 71% (w/w) with specific gravity of was diluted by taking…
A: Molar concentration : It is define the mole of substance in one Liter volume of solution.…
Q: Soil Fertility Index and Soil Evaluation Factors, Are these equations suitable for alkaline soil?…
A: Soil is a combination of organic matter, rocks, gases, liquids and organisms that sustain life…
Q: For titration for determination of Chloride, 0.05 AgNO3 and NaCl with a 5% (w/v) K2CrO4 indicator,…
A: In the determination of chloride ion concentration by Mohr's method, NaCl is used as the primary…
Q: A water containing 50 mg/L of phosphate (PO.) is flowing in an open channel at a volumetric flow…
A: One liter of water contains 50mg of phosphate ions and the total liter of water flowing per day is…
Q: The carbon dioxide from the combustion of 1.50 grams of C2H6 is collected over water at 25 degrees…
A: Given : Mass of C2H6 combusted = 1.50 g Temperature = 25 oC Pressure of CO2 produced = 746 mm Hg…
Q: Example: Caleulate the petential g a Kime electode 0. D1000 M naOH and saturated at 25c, mith Tm…
A: The solution is given below -
Q: Thirst Quench Sdn. Bhd. is in the process of developing a new banana juice drink. The ba juice drink…
A:
Q: The Henry’s law constant for CO2 in water at 25 °C is3.1x 10-2 M atm-1. (a) What is the solubility…
A: (a)Given, Henry’s constant for CO2 in water = 3.1*10-2M/atm. The mole fraction of CO2 in air is…
Q: During the preparation of viscose rayon, cellulose is dissolved in a bath containing sodium…
A: The names of steps involved in the manufacturing of viscose rayon are: Mercerisation Xanthation…
Step by step
Solved in 3 steps
- Hydrogen peroxide solutions can easily be decomposed by dust, trace amounts of metals or light. It istherefore necessary to periodically determine the purity of the peroxide solutions.This can be done via a redox titration as follows: The density of a particular surgical grade hydrogen peroxide solution is 1.11g.cm-3. Exactly 10 mL of this solution was pipetted and quantitatively transferred, along with a sufficientamount of a dilute sulphuric acid solution, into a 250.00 mL volumetric flask and made up to the mark. A 25.00 mL portion of this diluted solution is pipetted into a conical flask, and titrated with a0.372 M KMnO4 solution. The endpoint of the titration is determined when the colourless solution in the conical flask turns apersistent bright pink due to the presence of excess permanganate ions. The average titration value is 26.20 mL of the KMnO4 solution 1.Determine the percentage of the hydrogen peroxide in the solution sample.2. Naturally occurring manganese…1. A 0.3516 g sample of commercial phosphate detergent was ignited at a heat to destroy the organic matter. The residue was taken up in hot HCI which converted P to H3PO4. The phosphate was precipitated as MGNH4PO4.6H2O by addition of Mg+ followed by aqueous NH3. After being filtered and washed, the precipitate was converted to Mg2P2O7 by ignition at 1000 OC. This residue weighed 0.2161 g. Calculate the percent P (30.974) in the sample? Ans 17.11%The aluminum in a 1.200-g sample of impure ammonium aluminum sulfate was precipitated with aqueous ammonia as the hydrous Al2O3.xH2O. The precipitate was filtered and ignited at to give anhydrous Al2O3, which weighed 0.2001 g. Express the result of this analysis in terms of %NH4Al(So4)2 %Al2O3 %Al
- o/index.html?deploymentld%=55750828934189288909969212&eiSBN=9781305657571&snapshotld%32199898&id%3... ☆ IDTAP Q Search this cou Use the References to access important values if needed for this question. The concentration of H3ASO3 in a solution is determined by titration with a 0.1945 M Ce+ solution. The balanced net ionic equation for the reaction is: 2Ce*(aq) + H3ASO3(aq) + 5H2O(1) 2Ce*(aq) + H3ASO4(aq) + 2H3O*(aq) (a) If 19.83 mL of the 0.1945 M Ce** solution are needed to react completely with 30.00 mL of the H3ASO3 solution, what is the concentration of the H3ASO3 solution? M (b) Which of the two solutions was in the buret during the titration? (c) Suppose at the end of the titration, the solution containing the Ce³* ion is transferred to a volumetric flask and diluted to 300. mL. What is the concentration of Ce3+In the diluted solution? Submit Answer 5 question attempts remainingA sulfuric acid spill occurred on the highway after a truck containing barrels of sulfuric acid swerved out of control from a truck tire blowout. Luckily no one got hurt in the event but there is a concern that the sulfuric acid spill may affect local ground water supply. A sample of the ground water in that area was recovered to assess the extent of contamination of the ground water supply. In order to determine the concentration of sulfuric acid in the sample, 25.00 mL of the ground water sample was titrated with 0.133 M NaOH and you get the following data: Sodium hydroxide (initial buret reading) 0.66 mL Sodium hydroxide (final buret reading) 17.42 mL Calculate the molarity of sulfuric acid in the ground water sample. Enter numerical answer. Report in 3 sig figs. Show workYou are required to standardize a dilute solution of sulphuric acid, and undertake the following steps:(i) 4.805 g of solid sodium tetraborate (Na2B4O7) are added to a 250 mL volumetric flask, and the solution made up to the mark with distilled water.(ii) 25.00 mL aliquots of the stock solution from (i) are transferred to conical flasks, for titration against the sulphuric acid solution in the burette.(iii) You perform titrations using two different indicators: bromocresol green, and phenolphthalein.With bromocresol green, the average titre volume is 22.50 cm3, while with phenolphthalein, the average volume is 9.50 cm3.(a) Write the balanced equation for the reaction between Na2B4O7 and sulphuric acid
- To analyze an aspirin sample, 0.3470 g of crushed tablets are weighed and treated with 50.00 mL 0.1155 M sodium hydroxide, boiling for 10 minutes. Under these conditions the acid acetylsalicylic (MW, 180) reacts according to: CH3COO-C6H4-COOH + 2 OH- → OH-C6H4-COO- + CH3COO- The excess NaOH is then titrated with 11.5 mL of 0.2100 M HCl. What is the purity of said show ?.NH3 is a weak base. It ionizes in water to produce NH4+ and OH-. Its Kb = 1.8 10-5 and Kw = 1 10-14 at 25oC. Please complete following tasks for a solution of 0.0500 M NH3 (aq) at 25oC. (A) concentration of NH4+ework - 2022.pdf - Adobe Acrobat Pro DC (32-bit) Window Help Chapter 14 Soluti. x 3 / 3 100% Chapter 14 Homework 11) Drawing (1) shows a nonequilibrium system comprised of pure water separated from an aqueous solution by a semipermeable membrane which permits water molecules to pass through it, but not solute molecules. Shaded spheres represent solute particles and unshaded spheres represent water molecules. Which drawing (2)-(5) represents this system after equilibrium is reached? 11) (1) (3) (4) A) drawing (2) B) drawing (3) C) drawing (4) D) drawing (5) 12) An aqueous solution of NaoSO, is prepared and its measured freezing point is -16.0°C. 12) to search
- 3.) In the assay of NaHCO3, 3.0g of the solid is dissolved in 25mL water. What is the normality? How many mL of 1N H2SO4 will be required to neutralize this solution? From this volume of acid, compute the percent purity of NaHCO3.1) How much total sea salt is present in a 95 Kg person? (a normal person (70 kg BW) has approximately 43L body fluid). 2) Please express the normal blood glucose level into molarity (mM). 3) Commercial HCl is 36%. Please convert it into molarity. 4) Find out the Volume (dm3) of product at STP when 0.28 M, 200 mL NaOH (aq.) reacts with 250 mL 85% H3PO4 (Sp. G.-1.067). 5) The above reaction has the product Ammonia, which when dissolved in 300 mL water makes an alkaline solution. Find its molarity (M). 6) Please re-calculate the child dose as per the BW of the baby. (Adult dose-750 mg and the BW of the baby is 50 lb (British pound) (1 lb=0.453 Kg).. A wastewater treatment plant discharges 10 MGD effluent containing 200 mg/L ultimate BOD into a stream flowing at 90 MGD with ultimate BOD of 5 mg/L. The deoxygenation constant, kd, is 0.12/day. (a) What is the ultimate BOD (BOD) remaining in the stream at a distance of 10,000 m downstream if the stream flows at a constant speed of 0.10 m/s? (b) What should be the treatment plant effluent BOD. (CW) in mg/L if the ultimate BOD, at 10,000 m downstream cannot exceed 5 mg/L?