Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Steam enters the turbine at 1400 lbf/in.² and 1600°F and expands to 120 lbf/in.², where some of the steam is extracted and diverted to the closed feedwater heater. The remaining steam expands through the second-stage turbine to the condenser pressure of 2 lb/in.2 Condensate exiting the feedwater heater as saturated liquid at 120 lbf/in.2 undergoes a throttling process as it passes through a trap into the condenser. The feedwater leaves the heater at 1400 lbf/in.2 and a temperature equal to the saturation temperature at 120 lbf/in.² The net power output of the cycle is 288 MW. Step 1 Determine the mass flow rate of steam entering the first stage of the turbine, in lb/h. m₁ = i Save for Later lb/h Attempts: 0 of 4 used Submit Answer

Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Steam enters the turbine at 1400 lbf/in.² and 1600°F and expands to 120 lbf/in.², where some of the steam is extracted and diverted to the closed feedwater heater. The remaining steam expands through the second-stage turbine to the condenser pressure of 2 lb/in.2 Condensate exiting the feedwater heater as saturated liquid at 120 lbf/in.2 undergoes a throttling process as it passes through a trap into the condenser. The feedwater leaves the heater at 1400 lbf/in.2 and a temperature equal to the saturation temperature at 120 lbf/in.² The net power output of the cycle is 288 MW. Step 1 Determine the mass flow rate of steam entering the first stage of the turbine, in lb/h. m₁ = i Save for Later lb/h Attempts: 0 of 4 used Submit Answer

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water is the working fluid in an ideal Rankine cycle with reheat. Superheated vapor enters the turbine at 10 MPa, 320°C, and the condenser pressure is 8 kPa. Steam expands through the first-stage turbine to 1 MPa and then is reheated to 320°C. Determine for the cyclea. the heat addition, in kJ per kg of steam entering the first-stage turbine.b. the thermal efficiency.c. the heat transfer from the working fluid passing through the condenser to the cooling water, in kJ per kg of steam entering the first-stage turbine.
Water is used as the working fluid in an ideal Rankine Cycle. Steam enters the turbine at a pressure and temperature of 30 MPa and 620 deg C, respectively. The condenser pressure is 100 kPa. Determine the cycle thermal efficiency.
Water is the working fluid in an ideal Rankine cycle. Superheated vapor enters the turbine at 10 MPa, 550 degree Celsius. The condenser pressure is 10 kPa. The cycle is modified to include one open feedwater heater operating at 0.7 MPa. Saturated liquid exits the feedwater heater at 0.7 MPa. The new power output of the cycle is 150 MW. Determine for the cycle the rate of heat transfer to the working fluid passing through the steam generator, in kW, (b) the thermal efficiency.
A Carnot power cycle uses water as the working fluid. The boiler operates at a pressure of 2000 kPa and the condenser operates at 100 kPa. Saturated water enters the boiler and saturated vapor leaves the boiler. a. Calculate the heat transfer in the boiler and the condenser as well as the useful work of the cycle. b. Calculate the useful work extracted from the turbine and the work spent on the pump c. Determine the efficiency of the cycle using the definition of the Carnot cycle as well as using the definition of thermodynamic cycles d. Calculate the process efficiency of the pump and the turbine.
Water is the working fluid in an ideal Rankine cycle. Superheated vapor enters the turbine at 8 MPa, 480 degree Celsius. The condenser pressure is 10 kPa. The cycle is modified to include reheat. In the modified cycle, steam expands through the first-stage turbine to 0.7 MPa and then is reheated to 480 degree Celsius. If the net power output of the modified cycle is 100 MW, determine for the modified cycle (a) the rate of heat transfer to the working fluid passing through the steam generator, in MW, (b) the thermal efficiency, (c) the rate of heat transfer to cooling water passing through the condenser, in MW
2. In a reheat cycle steam enters the high pressure turbine at 40 bar and 400°C. It expands isentropic ally to 6 bar and is reheated at constant pressure to 400°C. This steam is expanded isentropic ally in the low pressure turbine to the condenser pressure of 0.1 bar. Calculate the thermal efficiency and steam consumption for 10 MW output.
8.25 Water is the working fluid in an ideal regenerative Rankine cycle. Superheated vapor enters the turbine at 10 MPa, 480°C, and the condenser pressure is 6 kPa. Steam expands through the first-stage turbine to 0.7 MPa where some of the steam is extracted and diverted to an open feedwater heater operating at 0.7 MPa. The remaining steam expands through the second-stage turbine to the condenser pressure of 6 kPa. Saturated liquid exits the feedwater heater at 0.7 MPa. Determine for the cycle a. the heat addition, in kJ per kg of steam entering the first-stage turbine. 2613.9 b. the thermal efficiency. 44.2% c. the heat transfer from the working fluid passing through the condenser to the cooling water, in kJ per kg of steam entering the first-stage turbine. 1458.4
Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Steam enters the turbine at 1400 lb-/in.² and 1200°F and expands to 120 lb-/in.2, where some of the steam is extracted and diverted to the closed feedwater heater. The remaining steam expands through the second-stage turbine to the condenser pressure of 2 lb-/in.² Condensate exiting the feedwater heater as saturated liquid at 120 lb-/in.² undergoes a throttling process as it passes through a trap into the condenser. The feedwater leaves the heater at 1400 lb/in.² and a temperature equal to the saturation temperature at 120 lbf/in.² The net power output of the cycle is 283 MW. Step 1 Determine the mass flow rate of steam entering the first stage of the turbine, in lb/h. m₁ = i lb/h
In a reheat-regenerative Rankine cycle, the condenser pressure is 10 KPa. Steam enters the first turbine at 12.5 MPa and 500 oC. Steam is reheated at 3 MPa at the same temperature before entering the second turbine. For the regeneration, steam is extracted from the second turbine at 0.5 MPa to an open feedwater heater (OFWH). Draw the schematic and T-S diagrams. Label the points by setting point 1 at the condenser outlet, point 2 at the 1st pump (right after the condenser) outlet, point 3 at the OFWH outlet, point 4 at the 2nd pump outlet, point 5 at the boiler outlet, point 6 at the reheater inlet, point 7 at the reheater outlet, point 8 for the extraction of steam to OFWH and point 9 at the condenser inlet. Use 2 decimal places for the enthalpy, steam quality (%), thermal efficiency (%), and other energies. For the fraction of steam (y) and entropy (s), use 4 decimal places. For the specific volume, use 6 decimal places. IMPORTANT: USE THE STEAM TABLES FROM CENGEL'S BOOK ONLY…
In a reheat-regenerative Rankine cycle, the condenser pressure is 10 KPa. Steam enters the first turbine at 12.5 MPa and 500 oC. Steam is reheated at 3 MPa at the same temperature before entering the second turbine. For the regeneration, steam is extracted from the second turbine at 0.5 MPa to an open feedwater heater (OFWH). Draw the schematic and T-S diagrams. Label the points by setting point 1 at the condenser outlet, point 2 at the 1st pump (right after the condenser) outlet, point 3 at the OFWH outlet, point 4 at the 2nd pump outlet, point 5 at the boiler outlet, point 6 at the reheater inlet, point 7 at the reheater outlet, point 8 for the extraction of steam to OFWH and point 9 at the condenser inlet. Use 2 decimal places for the enthalpy, steam quality (%), thermal efficiency (%), and other energies. For the fraction of steam (y) and entropy (s), use 4 decimal places. For the specific volume, use 6 decimal places. USE THE STEAM TABLES FROM CENGEL'S BOOK ONLY 1.T-S Diagram 2…
In an ideal Rankine cycle, steam is generated at 4.1 MPa and 486.5°C. The condenser is at 32°C. Determine: (Sketch the T-S Diagram and Schematic Diagram of the cycle) (28 ) a. The ideal pump work b. The cycle thermal efficiency
Water is the working fluid in a regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at 1600 lbf/in² and 1100°F and expands to 120 lb/in.2, where some of the steam is extracted and diverted to the open feedwater heater operating at 120 lb/in.2 The remaining steam expands through the second-stage turbine to the condenser pressure of 2 lb-/in.2 Each turbine stage and both pumps have isentropic efficiencies of 85%. Flow through the condenser, open feedwater heater, and steam generator is at constant pressure. Saturated liquid exits the open feedwater heater at 120 lbf/in.2 The mass flow rate of steam entering the first stage of the turbine is 2.42x106 lb/h. Determine the net power output of the cycle, in Btu/hr. W cycle = i Btu/h