Concept explainers
An oversized air-conditioning system will
A. cost more to install and operate.
B. be more efficient than an undersized air-conditioning system.
C. be better able to maintain the desired humidity in theconditioned space.
D. require a smaller air distribution system than an undersized air-conditioning system.
The correct option describing an oversized air-conditioning system.
Explanation of Solution
An over-sized air-conditioner, commonly known as higher tonnage A/C is predominantly expensive to own, operate and maintain. These air-conditioners usually weigh 1.5 ton and above.
These air-conditioners are bought to cool larger areas, and they come with a host of excellent features. On the flip side, they have a lot of things about them that make it difficult to maintain.
Initial outlay - The cost of purchasing these air-conditioners are 2 times the cost of owning smaller ones. This brings in the question of affordability.
Occupies larger area − As mentioned earlier, these devices are fit to be used in larger spaces like mansions or shopping centres. Their sized make it difficult for use in smaller houses.
Operational cost - The cost of servicing and maintenance of these devices are more as compared to the smaller ones. There are many instances of customers not refilling the gas which is needed for the circulation in the system. This leads to deterioration in the performance.
Considering these points, it can be concluded that an oversized air-conditioning system will cost more for installation and operation. Therefore, option B is the answer.
Want to see more full solutions like this?
Chapter 42 Solutions
Refrigeration and Air Conditioning Technology (MindTap Course List)
- Make decisions concerning needs and types of ventilation for acceptable indoor air quality?arrow_forwardc) Explain the layout and the basic operation of a centralized air conditioning system(or chiller system).arrow_forwarda) Explain four factors in determining the comfort level for an air conditioning room.Suggest the typical value for those factors.arrow_forward
- Which component is primarily responsible for the pressure in a cooling system? Select one: a. The thermostat b. The water pump c. The radiator cap d. The surge tankarrow_forwardDifferent types of air conditioning system.arrow_forwardBOOK - Heating Ventilating and Air-Conditioning Analysis and Designarrow_forward
- (c) Explain the lay out and the basic operation of a centralized air conditioning system (or chiller system).arrow_forwardThe outside design temperatures in the summerin Tucson, Arizona, for 25% of the time are ______F dry-bulb and______F wet-bulb.arrow_forwardWhich process would best represent the opposite ofexhausting air from a system?A. CoolingB. VentilatingC. HeatingD. Filteringarrow_forward
- Not all HVAC system are required to seal and insulated. Which ducts are not required to be sealed and insulated? A. Exposed ducts on roof B. Aluminum ducts in either an attic or crawl space C. Supply and or return ducts located in the conditioned space D. Return ducts located in a ventilated attic spacearrow_forwardWhich of the following is true regarding the refrigerantpiping on a rooftop package unit?A. The discharge and liquid lines must be field installed.B. The suction and liquid lines must be field installed.C. The discharge and suction lines must be field installed.D. No refrigerant lines are field installed.arrow_forwardExplain basic sauna and steam room installation.arrow_forward
- Refrigeration and Air Conditioning Technology (Mi...Mechanical EngineeringISBN:9781305578296Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill JohnsonPublisher:Cengage Learning