Concept explainers
Why is sawing one of the most efficient of the chip-forming processes?
The explanation for the sawing as most efficient chip-forming process.
Explanation of Solution
The process that is employed for the alternate chip forming process in modern industries to cut the workpiece into two or more parts is called sawing. The tool used in sawing consists of a series of narrowly spaced teeth. Because of this teeth the chip produced in the process confined in between the narrowly spaced teeth, after that chip will move out of the teeth.
In the majority of the chip forming process, the chip production length is high depending on the material used, velocity and feed. Whereas in the sawing process, there is minimum wastage of metal compared to chip forming processes. Therefore, in the view of wastage of material sawing is more efficient than other chip forming process.
Want to see more full solutions like this?
Chapter 27 Solutions
Degarmo's Materials And Processes In Manufacturing
Additional Engineering Textbook Solutions
Engineering Mechanics: Statics
Statics and Mechanics of Materials (5th Edition)
Fundamentals of Heat and Mass Transfer
Mechanics of Materials (10th Edition)
Mechanics of Materials
Engineering Mechanics: Statics
- What are the three main deformation zones in metal cutting and how does the heat distributeover a metal during any cutting processarrow_forward(34 10l ll SHEET 4 Lathes and... -> SHEET 4 Lathes and Milling operations 1- Define lath Process, why the tool should have Red Hardness Property? 2- What are the kinds of Cutting operations carried out using Lathes? 3- What are the Cutting Tools used in Shaping operation? 4- Explain some of common operation associated with drilling? 5- Define Milling Operations and what are differences between lathes and milling machines? 6- Explain with Drawings different types of Milling operations? 7- What are the different types of Milling machines?arrow_forward(d) Shear force.(e) Cutting force and thrust force.(f) Friction angle.arrow_forward
- In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and the tangential cutting forces were measured as 1259 N and 1601 N, respectively. The measured chip thickness after machining was found to be 0.3 mm. The rake angle was 10° and the axial feed was 100 mm/min. the rotational speed of the spindle was 1000 rpm. Assuming the material to be perfectly and Merchant's first solution, the shear strength of the material is closest toarrow_forwardWhat is the cutting speed of a material with a radius of 40 mm and a speed of 1000 rpm?arrow_forward4) Orthogonal cutting is performed on a metal whose mass specific heat C = 1.0 J/g-C, density = 2.9 g/cm3, and thermal diffusivity K = 0.8 cm2/s. Cutting speed = 3.5 m/s, uncut chip thickness = 0.25 mm, and width of cut = 2.2 mm. Cutting force = 950 N. Determine the cutting temperature if the ambient temperature= 25°C. %3D %3Darrow_forward
- SHEET 5 Grinding, Welding and Galvanizing operations 1- Define Grinding process, what are the main characteristics of classification of a grinding wheel? 2- What are the main grinding operations, why coolant is uses in any cutting operation? 3- What are the main classes of welding? 4- With drawing explain flam different types, what type is used in cutting and why? 5- What are the differences between OXYACETYLENE and ARC welding? 6- What are the defects of ARC welding operation? 7- Explain the Electric Resistance Welding? 8- Define the GALVANIZING Process and what are the main governing parameters in this operation?arrow_forwardQuestion 3. a. A cast iron component for motorcycle is to be turned with machine settings of feed = 0.22 mm/rev, and speed = 100 m/min. The cutting tool is a carbide tip with a nose radius of 1.2 mm and the rai for the material at a cutting speed of 100 m/min is 1.3. Calculate the surface roughness for this cut. [6 marks]arrow_forwardIn a turning operation, the workpiece diameter is Dm=44.00 mm and the diameter after the operation should be 22.00 mm. The cutting speed is set to 105.00 m/min and the federate is 0.03 mm/rev. Calculate the material 3 removal rate (Cm²Imin) for this operation (Do not input units). Your Answer: Answerarrow_forward
- (e) Briefly describe types of chips that occur in metal cutting. (f) For orthogonal cutting, the tool rake angle =15°. The chip thickness before the cut is 0.30mm and the cut yields a deformed chip thickness = 0.65mm. Calculate the shear plane angle and shear strain.arrow_forwardA 150 mm long with 12.5 mm in diameter of a stainless steel rod is being reduced in diameter to 12.0 mm using a lathe machine. The machine spindle rotates at 400 rpm, and tool is traveling at an axial speed of 200 mm/min. (c) Calculate: (i) Cutting speed (ii) Material remo val rate (iii) Cutting time.arrow_forwardFor a turning operation using a ceramic cutting tool, if the speed is increased by 50%, bywhat factor must the feed rate be modified to obtain a constant tool life? Use n = 0.5 and y =0.6.arrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY