A uniform steel rod of cross-sectional area A is attached to rigid supports and is unstressed at a temperature of 54°F. The steel is assumed to be elastoplastic with y= 36 ksi and E= 29 x 106 psi. Know that a = 6.5 x 10-6/F. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Determine the stress in the bar after the temperature has returned to 54°F. The stress in the bar is [ ksi.

A uniform steel rod of cross-sectional area A is attached to rigid supports and is unstressed at a temperature of 54°F. The steel is assumed to be elastoplastic with y= 36 ksi and E= 29 x 106 psi. Know that a = 6.5 x 10-6/F. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Determine the stress in the bar after the temperature has returned to 54°F. The stress in the bar is [ ksi.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.6.7P: A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The...

See similar textbooks

Similar questions

A spherical balloon is filled with a gas. The outer diameter of the balloon is 20 in. and the thickness is 0,012 in. Calculate the maximum permissible pressure in the balloon if the allowable tensile stress and the allowable shear stress in the balloon are 1 ksi and 0.3 ksi, respectively.
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A 12mm thick steel tire has a width of 110mm and has an internal diameter of 800mm. The tire is heated and shrunk to a steel wheel 800.5 mm in diameter. The modulus of elasticity E = 200 MPa. a. Determine the tensile stress in the tire. b. Determine the compressive pressure between the tire and the wheel. c. Determine the thickness of the tire to resist a pressure of 1.5 MPa if it has an allowable stress of 124 MPa. I need answer ASAP. Thank you!
A copper tube having a cross-sectional area of 2 000 mm2 and a length of 300mm is placed between two rigid caps. Four 22-mm-diameter steel bolts aresymmetrically arranged parallel to the axis of the tube and are lightly fastened.Find the stress in the tube if the temperature of the assembly is raisedby 70 °C. What load will each bolt carry at the raised temperature? (Let EST =200 GPa; Ecu = 100 GPa; aST = 12 x 10"6/oC; ac u = 16 x 10-6/°C.)
If the Young's modulus and Poisson's ratio of the container material are 100 GPa and 0.3 respectively, What is the axial strain in the cylinder wall at mid-depth?
Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 4.995 mm. determine the applied force F. Select one: O F = 5236 N O F = 6283 N %3D O F= 13090N O F = 10472 N O F= 15708N OF=4189 N 9:22 PM EN ? 4/15/2021
Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 3.995 mm. determine the applied force F. Select one: F = 10472 N O F = 6283N O F= 15708 N O F = 4189N O F = 5236 N O F = 13090 N Clear my choice
A thin plate is subjected to a biaxial stress field of  x= 1 Gpa and  y= 0.5 Gpa. Calculate the strains in the xy directions if the plate is made of (a) steel, (b) a 0° unidirectional boron-epoxy composite. For the boron-epoxy composite use the following properties: Young’s Modulus at 0°=207 Gpa, modulus at 90° = 19 Gpa,  12=0.21, G12= 6.4 Gpa. Assume for steel a young’s modulus = 207 GPa
Let’s consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young’s modulus E = 200 Gpa and a Poisson’s ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 5.995 mm. determine the applied force F.
An AISI 1020 steel rod 12 feet long is anchored between two rigid supports. At 68 degrees the rod has a stress of 6,000 psi. At what temperature will the rod have no stress? (assume the rod is in tension) Could someone please help me solve this question?
Clear my choice Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young's modulus E = 120 Gpa and a Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 5.998 mm. determine the applied force F. Select one: O F= 5712 N O F= 2285 N O F= 8568 N O F= 2856 N O F= 3427 N O F=7140 N Finish attempt..
A steel rod of 20 mm diameter passes centrally through a copper tube 40 mm external diameter and 30 mm internal diameter. The tube is closed at each end by rigid plates of negligible thickness. The nuts are tightened lightly home on the projected parts of the rod. If the temperature of the assembly is raised by 60°C, calculate the stresses developed in copper and steel. Take E for steel and copper as 200 GN/m2 and 100 GN/m2 and α for steel and copper as 12 x 10-6 per °C and 18 x 10-6 per °C.