Foreattt part of iTIS qtestfoni; tonsider FOHOWIHg Btetat: You need to make a stock solution of Ca( C2H3O2 )2 with a concentration of 6.50 M. You have a 850.0 mL volumetric flask available to make this stock solution in. You are then tasked with using this stock solution to prepare a sample for use in an experiment. The experimental sample should have a final volume of 15.0 mL and a concentration of 0.350 M Ca(C2H3O2)2. a) What is the molar mass of Ca(C2H3O2)2? b) How many moles of the solute would be needed to create the stock solution using the volumetric flask available? c) How many grams of the solute should be added to the volumetric flask to create the stock solution? d) What volume, in mL, of the stock solution should be used to prepare the experimental solution through dilution? US 目 M

Foreattt part of iTIS qtestfoni; tonsider FOHOWIHg Btetat: You need to make a stock solution of Ca( C2H3O2 )2 with a concentration of 6.50 M. You have a 850.0 mL volumetric flask available to make this stock solution in. You are then tasked with using this stock solution to prepare a sample for use in an experiment. The experimental sample should have a final volume of 15.0 mL and a concentration of 0.350 M Ca(C2H3O2)2. a) What is the molar mass of Ca(C2H3O2)2? b) How many moles of the solute would be needed to create the stock solution using the volumetric flask available? c) How many grams of the solute should be added to the volumetric flask to create the stock solution? d) What volume, in mL, of the stock solution should be used to prepare the experimental solution through dilution? US 目 M

Chemistry: Principles and Practice

3rd Edition

ISBN:9780534420123

Author:Daniel L. Reger, Scott R. Goode, David W. Ball, Edward Mercer

Publisher:Daniel L. Reger, Scott R. Goode, David W. Ball, Edward Mercer

Chapter14: Chemical Equilibrium

Section: Chapter Questions

Problem 14.97QE: According to the Resource Conservation and Recovery Act (RCRA), waste material is classified as...

See similar textbooks

Similar questions

68. Aluminum ion may be precipitated from aqueous solution by addition of hydroxide ion, forming Al(OH)3. A large excess of hydroxide ion must not be added, however, because the precipitate of Al(OH)3 will redissolve as a soluble compound containing aluminum ions and hydroxide ions begins to form. How many grains of solid NaOH should be added to 10.0 mL of 0.250 M A1Cl3 to just precipitate all the aluminum?
According to the Resource Conservation and Recovery Act (RCRA), waste material is classified as toxic and must be handled as hazardous if the lead concentration exceeds 5 mg/L. By adding chloride ion, the lead ion will precipitate as PbCl2, which can be separated from the liquid portion. Once the lead has been removed, the rest of the waste can be sent to a conventional waste treatment facility. How many grams of sodium chloride must be added to 500 L of a waste solution to reduce the concentration of the Pb2+ ion from 10 to 5 mg/L?
When 85.0 mL of 0.250 M Ba(OH)2 solution is added to 85.00 mL of 0.250 M Al (NO3)3 solution, a white gelatinous precipitate of Al(OH)3; is formed. Assuming 100% yield, (a) what mass (in grams) of Al(OH)3 is formed? (b) what is the molarity of each of the ions Ba2+, OH-, Al3+, NO3- in the resulting solution?
A chemist dissolves a 1.497-g sample of a type of metal (an alloy of Sn, Pb, Sb, and Cu) in nitric acid, and metastannic acid, H2SnO3, is precipitated. She heats the precipitate to drive off the water, which leaves 0.4909 g of tin(IV) oxide. What was the percentage of [in in the original sample?
Twenty-five milliliters of a solution (d=1.107g/mL)containing 15.25% by mass of sulfuric acid is added to 50.0 mL of 2.45 M barium chloride. (a) What is the expected precipitate? (b) How many grams of precipitate are obtained? (c) What is the chloride concentration after precipitation is complete?
Consider the generic chemical equationaA+bBcC+dD (where a, b, c, and d represent coefficients for the chemicals A, B, C, and D, respectively). a. How many possible values are there for “c”? Explain your answer. b. How many possible values are there for “c/d”? Explain your answer.
Sodium bicarbonate (baking soda), NaHCO3, can be purified by dissolving it in hot water (60 C), filtering to remove insoluble impurities, cooling to 0 C to precipitate solid NaHCO3, and then filtering to remove the solid, leaving soluble impurities in solution. Any NaHCO3 that remains in solution is not recovered. The solubility of NaHCO3 in hot water of 60 C is 164 g/L. Its solubility in cold water of 0 C is 69 g/L. What is the percent yield of NaHCO3 when ills purified by this method?
Gold metal will not dissolve in either concentrated nitric acid or concentrated hydrochloric acid It will dissolve, however, in aqua regia, a mixture of the two concentrated acids. The products of the reaction are the AuCl4 ion and gaseous NO. Write a balanced equation for the dissolution of gold in aqua regia.
When jump-starting a car with a dead battery, the ground jumper should be attached to a remote part of the engine block. Why?
The following data apply to the unbalanced equation A(g)B(g) (a) On the basis of the data, balance the equation (simplest whole-number coefficients). (b) Has the system reached equilibrium? Explain.
The Handbook of Chemistry and Physics (http://openstaxcollege.org/l/16Handbook) gives solubilities of the following compounds in grams per 100 mL of water. Because these compounds are only slightly soluble, assume that the volume does not change on dissolution and calculate the solubility product for each. (a) BaSiF6, 0.026 g/100 mL (contains SiF62- ions) (b) Ce(IO3)4, 1.5102 g/100 mL (c) Gd2(SO4)3, 3.98 g/100 mL (d) (NH4)2PtBr6, 0.59 g/100 mL (contains PtBr62- ions)