Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A belt of negligible mass passes between cylinders A and B and is pulled to the right with a force P. Cylinders A and B weigh, respectively, 5 and 20 lb. The shaft of cylinder A is free to slide in a vertical slot and the coefficients of friction between the belt and each of the cylinders are us= 0.54 and k = 0.40. Assume P to be 2.4 lb. Ţ 8 in. 4 in. Determine the angular acceleration of cylinder A. (You must provide an answer before moving on to the next part.) There is no slipping between cylinder A and the belt. True The angular acceleration of cylinder A is 16 rad/s2 G.

Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A belt of negligible mass passes between cylinders A and B and is pulled to the right with a force P. Cylinders A and B weigh, respectively, 5 and 20 lb. The shaft of cylinder A is free to slide in a vertical slot and the coefficients of friction between the belt and each of the cylinders are us= 0.54 and k = 0.40. Assume P to be 2.4 lb. Ţ 8 in. 4 in. Determine the angular acceleration of cylinder A. (You must provide an answer before moving on to the next part.) There is no slipping between cylinder A and the belt. True The angular acceleration of cylinder A is 16 rad/s2 G.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.24P: A uniform plank is supported by a fixed support at A and a drum at B that rotates clockwise. The...

See similar textbooks

Similar questions

The figure shows a steel bar being processed by a rolling mill. Given that P=80kN and r =0.016, determine the force F required to advance the bar at a constant speed.
A uniform plank is supported by a fixed support at A and a drum at B that rotates clockwise. The coefficients of static and kinetic friction for the two points of contact are as shown. Determine whether the plank moves from the position shown if (a) the plank is placed in position before the drum is set in motion; and (b) the plank is first placed on the support at A and then lowered onto the drum, which is already rotating.
Calculate the horizontal force P required to push the 85-lb lawn mower at constant speed. The center of gravity of the mower is at G, and the coefficients of rolling resistance are 0.12 for the front wheels and 0.18 for the rear wheels.
The block of weight W is pulled by the force P inclined at the angle to the horizontal. Find the smallest force P and the corresponding angle that would cause impending sliding of the block. The angle of static friction between the block and the ground is s.
Draw the FBD of the entire frame, assuming that friction and the weights of the members are negligible. How many unknowns appear on this FBD?
A solid block A weighing Q kg is resting on a flat floor. A smooth cylinder B weighing Pkg. is placed between the solid A and the vertical wall as shown in fig. The friction between the cylinder, wall and the block A is negligible. The co-efficient of friction between the block A and floor is u. The minimum weight Prequired to disturb the block A is Wall to Floor
For the delivery truck shown: The mass of the truck is 4000 kg. The horizontal distance from the rear tires to the center of mass, G, is L1 = 3 m The vertical distance from the ground to G is d = 3m The horizontal distance from the rear tires to the front tires is L2 = 5 m. d The delivery truck is traveling at 20 m/s when the brakes are applied. The truck skids to a stop, so that the friction force is applied to the tires by the road.* The coefficient dynamic friction is uk = 0.60 *If it did not skid, then the friction force would be between the brake pads and the brake disc, which would be above the road. Calculate the distance that the truck travels before it stops. Use Σ MA = Ia + d x m*a for the following: 'O' Calculate the left side of this equation: Σ MA G L1 → L2 Calculate the right side of this equation: I*α + d x m*a d+ x m*a is from r x m*a (cross product), so, determine the sign by considering the cross product. Set the left and right right sides equal to each other and…
In the system shown two blocks A and B are joined by anegligible ground cable passing through a fixed pulley that does notbroken. Block A has a mass of 45 kg and the coefficients ofstatic friction are 0.40 between rope and pulley and 0.30 betweenblocks and inclined planes. Determine:a) The maximum mass of block B that will cause theblock A slides down.b) The minimum mass of block B that will cause block A to slide up.c) Explain the condition of the system if the mass of block B were 80 kg.
In the system shown two blocks A and B are joined by anegligible ground cable passing through a fixed pulley that does notbroken. Block A has a mass of 45 kg and the coefficients ofstatic friction are 0.40 between rope and pulley and 0.30 betweenblocks and inclined planes. Determine: a) The maximum mass of block B that will cause theblock A slides down.b) The minimum mass of block B that will cause block A to slide up.c) Explain the condition of the system if the mass of block B were 80 kg.
Figure 2 В A Block A is hanging from a massless string which runs over a massless and frictionless pulley and connects to Block B. Block B slides over an inclined plane with ordinary kinetic friction. The plane under block B is inclined at an angle theta = 0 away from vertical. The other side of Block B is connected to another massless string which runs over another massless and frictionless pulley to connect to Cart C. Cart C rolls without friction over a plane which is inclined at an angle of phi = y away from vertical. C
the system blocks shown below is in equilibrium, the weight of block A is 10 kN and for block B is 35 kN . The coefficient of friction between A and surface is 0.2 and between two block A and B is 0.15. Answer the following: The direction of friction force between two blocks which effect on block A is in * First Quarter Second Quarter Third Quarter Fourth Quarter The value of friction force between two blocks is * 5.6 kN 6.4 kN 4.8 kN Non above-mentioned The value of friction force between block A and its surface is * 4.0 kN 5.5 kN 6.2 kN Non above-mentioned The coefficient of friction between block B and surface is * 5 نقاط 0.24 0.63 0.56 0.37 The value of friction force between the block B and it's surface is * 25 kN 35 kN 15 kN Non above-mentioned The system is in * Equilibrium Impending to motion Kinematic
Q3 (a): A horizontal stick OA of mass 2m has its left P end attached to a pivot O on a plane inclined at an angle 0, while its right end A rests on the top of a cylinder of mass m which in turn rests on the plane, as shown in Fig. The coefficient of friction between the cylinder and both the stick and the plane is u. 2m А m (i) Assuming that the system is at rest, what is the normal force from the plane on the cylinder? (ii) What is the smallest value of u (in terms of 0) for which the system doesn't slip anywhere?