A+ Guide To It Technical Support
10th Edition
ISBN: 9780357108291
Author: ANDREWS, Jean.
Publisher: Cengage,
expand_more
expand_more
format_list_bulleted
Concept explainers
Expert Solution & Answer
Chapter 7, Problem 1TC
Explanation of Solution
Given:
A system that has been installed with a network adapter, booted up, and installed with drivers.
To find: The first and second steps that should be done when the system with newly-installed NIC is not visible by a remote system.
Solution:
Since, the NIC is not recognized by the system, the first step should be to check the status of indicator lights and the second step should be to check the network connections and addressing.
Hence, option (c) will be the first step and option (b) will be the second step.
Want to see more full solutions like this?
Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
You have recently installed a new Windows Server 2019 system. Following the installation, your server does not have Internet access. You notice that your network interface has an IPv4 address of 169.254.3.29 and an IPv6 address that starts with FE80. What do these indicate, and what steps should you take to remedy the problem?
Solve all these problems
What is the DOS command prompt to start the DHCP server?
What is the DOS command prompt to stop the DHCP server?
What is the DOS command prompt to pause the DHCP server?
What is the DOS command to return the mac address of any clients from server?
Is it possible for linux Os computers to take dynamic ip configurations from windows server?
What is 80/20 Rule for Servers and Scopes?
There are two versions of Network Monitor are available, what are there? What the differences between them?
What is the WINs in windows server?
In which partition of file system the DHCP configuration files store?
What is the difference between network and Network-Manager services?
A help desk technician just informed the security department that a user downloaded a suspicious file from internet explorer last night. The user confirmed accessing all the files and folders before going home from work. the next morning, the user was no longer able to boot the system and was presented a screen with a phone number. The technician then tries to boot the computer using wake-on-LAN, but the system would not come up. which of the following explains why the computer would not boot?
A. The operating system was corrupted.
b. SElinux was in enforced status.
C. A secure boot violation occurred.
D. The disk was encrypted.
Chapter 7 Solutions
A+ Guide To It Technical Support
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, computer-science and related others by exploring similar questions and additional content below.Similar questions
- You have recently installed a new Windows Server 2019 system. Following the installation, your server does not have Internet access. You notice that your network interface has an IPv4 address of 169.254.3.29 and an IPv6 address that starts with FE80. What do these indicate, and what steps should you take to remedy the problem? Within a one-page memo, prepare a sample IT support ticket that includes this information.arrow_forwardWhat is the DOS command to return the mac address of any clients from the server? Is it possible for linux Os computers to take dynamic ip configurations from windows server? What is the WINs in Windows server? In which partition of the file system the DHCP configuration files store? What is the difference between network and Network-Manager services?arrow_forwardSolve all these problems What is an APIPA? What is the relationship between DHCP server and APIPA? What are the DHCP scopes? What is the DOS command prompt to start the DHCP server? What is the DOS command prompt to stop the DHCP server? What is the DOS command prompt to pause the DHCP server? What is the DOS command to return the mac address of any clients from server? Is it possible for linux Os computers to take dynamic ip configurations from windows server? What is 80/20 Rule for Servers and Scopes? There are two versions of Network Monitor are available, what are there? What the differences between them? What is the WINs in windows server? In which partition of file system the DHCP configuration files store? What is the difference between network and Network-Manager services?arrow_forward
- Which of the following statements is true about NIC (Network Interface Card)? There might be multiple correct answers. When operating in "promiscuous" mode, NIC passes every frame received from the network to the kernel. Each NIC has a MAC address. Each NIC has a hardcoded IP address. NIC checks the destination address for every packet, if the address matches the cards MAC address, it is further copied into a buffer in the kernel. Every NIC on the network will hear all the frames on the wire.arrow_forwardYou have just added new DNS servers to the server options on your DHCP server. Generally, what is the quickest way for your clients to receive the new settings? * Reboot the workstation twice Wait for the DHCP client to renew its lease Clear the DNS server cache Run ipconfig /renew on the client Run ipconfig /registerDNS on the clientarrow_forwardWhile troubleshooting a workstation connectivity problem, you enter the following command: ping 127.0.0.1. The response indicates the test failed. What can you determine about that workstation?a. Its network cable is faulty or not connected to the wall jack.b. Its TCP/IP stack is not installed properly.c. It has been prevented from transmitting data past the default gateway.d. Its DHCP settings are incorrect.e. Its DNS name server specification is incorrect.arrow_forward
- Linux Command Function ifconfig also: ifcfg, ifup, ifdown, ethtool, nm-tool /etc/init.d/networking restart ip link set down ip link set up The ifconfig command is a tool used to display and configure network interfaces. This command will display information about the network card, IP address, broadcast address, and network mask. It also shows how many packets were received and transmitted. There is also information about the loopback device (lo). ping The ping command allows the user to test whether or not a network connection is active, the speed of that connection, and how a network behaves given specific data loads. arpalso: arping The arp command by itself is used to view the information currently in the ARP table (Address Resolution Protocol). This table maps the IP address of machines on your network segment with their MAC address. hostnamealso: domainname, dnsdomainname The hostname command tells you what the hostname of your machine is set to. The…arrow_forwardYou are the system administrator of an SSH server. You want to configure your system to prevent the root account from being used for remote logins.What file contains the necessary setting to prohibit users fromremotely logging into the SSH server as "root"? What setting needs to beconfigured in this file?arrow_forwardNew DNS servers have been added to the server configuration of your DHCP server. What is the most effective way for your consumers to receive the most recent settings? * Double-restart your machine. On the client, use the command ipconfig /registerDNS Wait for the DHCP client's lease to be renewed. O On the client, use the command ipconfig /renew. Delete the server's DNS cache.arrow_forward
- A user calls in about a printer issues. You ask for the IPv4 address listed on the printer's configuration report. The user reads an IPv4 address of 169.254.13.50 from the report. What would this tell you? a. The printer has a paper jam. b. The printer failed to obtain an IP address from DHCP. c. The printer had too many print jobs sent to it. d. The printer has a valid IP address and should work after a restart.arrow_forwardWhat is an APIPA? What is the relationship between DHCP server and APIPA? What are the DHCP scopes? What is the DOS command prompt to start the DHCP server? What is the DOS command prompt to stop the DHCP server? What is the DOS command prompt to pause the DHCP server? What is the DOS command to return the mac address of any clients from server? Is it possible for linux Os computers to take dynamic ip configurations from windows server? What is 80/20 Rule for Servers and Scopes? There are two versions of Network Monitor are available, what are there? What the differences between them? What is the WINs in windows server? In which partition of file system the DHCP configuration files store? What is the difference between network and Network-Manager servicSarrow_forwardYour DHCP server's configuration now includes these alternative DNS servers. In general, what is the best way for your clients to get the new settings? * Double-click the Restart button. Just do ipconfig /registerDNS on the client's machine. Watch for the DHCP client to request a lease renewal. O Input ipconfig /renew into the client's terminal. Do not forget to clear the server's DNS cache.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- A+ Guide To It Technical SupportComputer ScienceISBN:9780357108291Author:ANDREWS, Jean.Publisher:Cengage,A+ Guide to Hardware (Standalone Book) (MindTap C...Computer ScienceISBN:9781305266452Author:Jean AndrewsPublisher:Cengage Learning
A+ Guide To It Technical Support
Computer Science
ISBN:9780357108291
Author:ANDREWS, Jean.
Publisher:Cengage,
A+ Guide to Hardware (Standalone Book) (MindTap C...
Computer Science
ISBN:9781305266452
Author:Jean Andrews
Publisher:Cengage Learning